- Product num: MCETI-60
- Equivalent: K-600ET0820 Equivalent
General Information
MCETI-60 is an equivalent, replacement, alternative, analog, retrofit and analogue to replace Hyflux KRISTAL K-600ET0820 (K600ET0820) UF membrane module.
MCETI-60 ultrafiltration (UF) membrane module is a pressurized module, which is designed and manufactured for the filtration of process, potable water and wastewater. Major applications are the filtration of surface water, potable water, industrial wastewater and municipal sewage. These UF modules are made of naturally hydrophilic PES hollow fiber ultra-filtration membrane with excellent performance.
MCETI-60 UF module is applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.
Features
- A nominal molecular weight cut off of 120K Dalton
- Microporous symmetric structure
- Naturally hydrophilic membrane composed of a blend of polyethersulfone and polyvinylpyrrolidone
- High performance and very good anti-fouling characteristic
- Typical filtrate quality SDI < 2.5, turbidity < 0.1 NTU
- Membrane filtration provides 99.9999% (LOG 6) reduction of bacteria (Pseudomonas diminuta) and 99.99% (LOG 4) reduction of virus (MS2 colifages) by mechanical means.
Advantages
- High quality raw material
- High thermal and chemical solvent resistance
- High chemical tolerance for cleaning
- Optimized design, high resistance to fouling
- Direct and economical module replacement
Applications
- Surface water
- Potable water
- Pre-treatment of sea water desalination
- Pre-treatment of industrial water
- Industrial wastewater
- Municipal sewage
Module Dimensions
| L | L1 | D | D1 | Feed, Filtrate, Concentrate |
| 2,340 mm (92.13 inch) | 316 mm (12.44 inch) | 344 mm (13.54 inch) | 216 mm (8.5 inch) | 1.5” FNPT |
Specifications
| Specifications | Parameters |
| Part number | MCETI-60 |
| Effective membrane area | 60 m² (645 ft²) |
| Membrane material | Polyethersulfone (PES) |
| Fiber ID/OD | 0.7/1.35 mm (0.02/0.05 inch) |
| Tensile strength | > 5 N |
| Flow direction | Outside-in |
| Nominal molecular weight cut off | 120,000 |
| Bacteria removal | > 99.9999% |
| Housing material | UPVC |
| End caps material | UPVC |
| Potting material | Polyurethane resin |
| O-rings material | EPDM |
| Dry weight |
